Use 2 Blades as Tandem Combination
Tandem Combinations: Two saw chain cutter accessories used with our universal nut will virtually double productivity in a safe and efficient way. This much is certain – regardless of your choice, any combination will shape wood faster than anything you’ve experienced. In addition, you have the bonus that both blades can be used individually.
Two Lancelots enable incredibly fast stock removal. Lancelot and Squire are excellent in sweeping or raking wood away for convex shaping.
NOTE: You CANNOT use the blades with 7/8″ centers in a Tandem Combination.
You CAN fit any Lancelot and any Squire in Tandem combination with each other -or- any two Lancelot -or- any two Squire blades.
You MUST use our Universal NUT when mounting any Tandem Combination.
With two blades you have more teeth, more versatility, more options, faster wood removal and shaping. You get to your final piece much quicker. Most people use two blades for their rough out carving then change down to one blade for detail work. But if your application only has need for one blade, choose either the 22 or 14 tooth Lancelot.
If using 2 different tooth Lancelot Blades, place the 14 tooth on first, then fit the 22 tooth directly on top and tighten both blades with the Universal Nut. The advantage is when using them on their face, the 22 tooth is the only blade in contact with the wood doing the work and gives you the nicest, finer finish.
What is the advantage of using the larger Lancelot together with a Squire? 1) When you turn the blades at an angle on their face, similar to using a grinding wheel or a sander, the offset chain saw blades will both come in contact with the wood. 2) You can have between 26 to 40 teeth for either rough or fine removal. 3) They are great for removing large amounts of surface material, scalloping or convex shaping. 4) By cutting across the surface of the wood from left or right to center, (imagine removing bark from a tree or similar) you will rapidly remove huge amounts of surface wood.
Holey Galahad Carbide Discs, Tandem CombinationsFor use with Holey Galahad Discs and joining Lancelot and Squire Chainsaw blades. You cannot use the locknut that came with your grinder to tighten two chainsaw type blades! You can use the manufacturer's locknut to tighten one blade only. Their locknut has a 22mm shoulder which will not allow it to tighten two blades. We designed the Universal Nut with its flat base and hexagon head specifically for the purpose of holding any double blade combination. Using a 13/16(21mm) spanner, socket or crescent wrench, its much easier than manufacturers two pin spanners. It can also be used to tighten other accessories.CA $11.88