Drill chuck with sliding sleeve for the tailstock of the DB 250. Clamps up to 13/64" (5.0mm).
Is inserted on the spot of the rotating back centre.
The feed movement results from sliding the complete tailstock
Three jaw chuck for the lathe DB 250. Used for concentric clamping.
Made from steel and offering 1/16" - 1 13/32" (1.5 to 32mm) and 1/2" - 2 14/32" (12 to 65mm) when reversing the jaws.
The chuck has a M16 x 1 thread for fitting directly to the DB 250 head-stock spindle. NO DISCOUNTS