Foredom Micro Motor Kit 1070

Foredom Micro Motor Kit 1070

CA $21.42CA $427.00

The 1070 Micro Motor operates at speeds up to 38,000 rpm in both forward and reverse rotation.  Bur changes are quick and easy with a simple twist of the handpiece locking ring.  Our 1070 comes with a 1/8″ collet and we recommend you also purchase a 1/8 to 3/32 collet adapter.

 

Product Name Price Quantity
CA $502.74 CA $427.00
CA $289.80
CA $21.42
000

Foredom Micro Motor Kit 1070

For high speed applications up to 38,000 rpm fine detailing in wood. The back of the control box has a convenient Voltage Selector switch for operating with either 115 or 230 Volt operation. This Kit is already set for 110-115 Volt use. The control converts AC current to DC current required for the handpiece. Compared to flexible shaft machines, micromotors have less torque, however, their higher speed results in a comparable rate of material removal with a lighter touch. The simple cord connection between the handpiece motor and control box is another key advantage. Unlike the “drag” and general restriction in movement that you have with a shaft and sheath, micromotors offer much greater freedom of movement.
Our Kit 1070 includes:
•HP4-917 Control Box
• H.MH-17018 Handpiece with 1/8″ Collet installed
•HP4-960 Variable Speed Foot Control
•HP4-933 Handpiece Cradle
•Spare pair of motor brushes, spare fuse, collet changing wrenches.

More about our Foredom Micro Motor Kit 1070:

HP4-917 Control Box is compact with switches on the front for On/Off Power, Forward or Reverse Rotation, and Manual or Foot Speed Control. Speed can be adjusted from low to full speed using the dial on the box or with the foot pedal. An Overload Protector Light is also featured that turns red and sounds a beeping alarm when the motor stalls. This is the same control unit that comes in Micromotor Kits K.1020, K.1080 and K.1090.

H.MH-17018 High Speed Rotary Handpiece has a slender, contoured grip for precise and very high speed work and quick release rotary type chuck. It has a fan cooled, brush-type continuous duty motor that runs cool and vibration free with permanently lubricated, shielded ball bearings that require no lubrication.
Optional collets are available separately. Bur changes are quick and easy with a simple twist of the front section of the Handpiece.

Handpiece specifications: 6.2″ overall length, 5/8″ grip diameter, 1″ motor diameter, 7.3 oz./208 gr., DC30V/1.2A. CE marked.

Tip:
Consider purchasing a separate “Collet Adapter” that fits inside the handpiece collet and allows the use of smaller shank size accessories.

Two Year Limited Warranty

Reviews(0)

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.