Pop Says: This is an absolutely awesome Micro Motor. When it is running at 35,000rpm you can hardly tell it is turned on! And at 50,000rpm there is absolutely NO VIBRATION … and EXTREMELY quiet! If you are a serious carver then this machine is well worth the investment!
Two Year Warranty. This great little Micro Motor has a new Brushless Motor design – no need to replace carbon brushes! High Torque even at minimum speeds. Sealed housing eliminates dust, noise and vibration.
The Control Box features a LED Front Panel. Dial speed control sets precise speed and torque. Kit includes: Control, Handpiece with 1/8″ Collet, Variable Speed Foot Control, Handpiece Cradle and Extra Fuse
Micro Motors are detailers and are versatile bench top wood carving tools. The handpiece houses a DC motor within. Providing much higher speed performance and as well as more flexibility. Therefore distinguishes them from flex shaft models. While Micro Motors have much less torque than flex shaft machines they do offer much more control. However, their higher speed results in a comparable rate of material removal with a lighter touch. They have a simple coil cord connection between the handpiece motor and control box. This therefore allows for complete freedom of movement that cannot be achieved when using a flexible shaft machine.
Our 1050 model comes with Dual Ports so you can plug in two handpieces at the same time.
Kit includes control box with digital display, handpiece with 1/8″ collet, variable speed foot pedal, handpiece cradle, and extra fuse. Get one of our many collet adapters and you can use shanks with 1/16″ or 3/32″ diameters.
Brushless micromotor is ideal for various applications at high, medium and low speed.
•High Speed Applications: Running at high speed, it provides smooth, clean, and sharp detailing in metal and wood. It’s also great for bright-cutting, grinding, finishing, texturing, and polishing. You never need to changes the brushes on this handpiece.
•Medium Speed Applications: At medium speeds it is ideal for effortless and fast stock removal in wood, diestone, or acrylics.
•Low Speed Applications: The low end offers extra control and power for stone setting and milling.
More Features of the Foredom Brushless Micro Motor Kit 1050
Two Year Limited Warranty.
Brushless motor design carbon brushes NEVER need changing
Maximum Torque or Watts Output 10 oz. in or 70mNm or 230W. Powerful even at minimum speeds
Sealed housing eliminates dust, noise, and vibration
Additional port for Brush Type Micromotor Handpiece:
HP4-817 (115V) Control Box and Front Panel LED Specifications and Features-
50/60 Hz, 100VA, 5.4″ wide, 9.1″ deep, 7″ high
Dial speed control sets precise speed and torque
Auto cruise, Forward or Reverse rotation, Dial or Foot speed control
Digital display for precise speed and torque settings
Built in overload protection
Brushless micromotor handpiece connects to port on back side of control box
Optional brush type handpiece connects to port in front.
H.MH-150 Brushless Handpiece/Motor Specifications and Features –
6.3″ long, 1.06″ motor diameter, .75″ grip diameter, 8.4 oz/237.7 gr., 115 volt
Ergonomic and brushless with long-lasting ceramic ball bearings
Bur changes are quick and easy with a simple twist of the front section of the Handpiece.
Comes with 1/8″ collet.
HP7-7060 Foot Speed Control –
This variable speed foot control works with control box HP4-717 to vary speed from 1,000 to 50,000 RPM
Only logged in customers who have purchased this product may leave a review.