Arbortech Contour Random Sander
•Moulds to shape for effective sanding of shaped and sculpted forms
•Powerful random sanding action
•Does not burn or dig in at edges
•Fits to any standard angle grinder
Watch the Contour Sander in Action Make Your Own Sanding Discs
Arbortech Contour Random Sander Make Your Own Sanding Discs
This sander is another great product from Arbortech, even spinning at 1200 rpm on the angle grinder, the 50mm flexible disc orbits rather than spins in contact with the wood. The provides for a smooth finish without any burn or scratch marks whatsoever! The supplied self adhesive sanding discs has a peel-off back which can be replaced if you want to swap to a finer grit and before the abrasive has worn out. The adhesive used is an industrial cement which holds on really well. The discs do not heat up and soften the adhesive in use.
You might think using an angle grinder with a long shaft would be a little cumbersome and vibration might be a problem, but it is quite comfortable to use and has little or no vibration. The attachment very well machined and presented, just like other Arbortech products.
Arbortech Contour Random Sander, Arbortech Contour SanderFits straight onto an Angle Grinder and is a random sander so it doesn't spin, scratch or burn the wood. The 2" backing pad easily fits around the tightest curves and the sanding discs hold up for a considerable amount of time.CA $104.00
Arbortech Contour Random Sander, Arbortech Contour SanderPackage of 25 self-adhesive discs in following grits: 80 grit; 120 grit; 180 grit; 240 grit; 320 grit; 400 grit; 600 grit. A Tip From Pop: use a light touch when sanding and your sanding discs will last much longer!CA $11.46
Arbortech Contour Random Sander, Arbortech Contour SanderSave time when changing sandpaper grits. Pop finds it easier to have a few of the rubber pad assemblies with different grits of sandpaper attached. Replacement or spare rubber pad assembly as pictured. Order a couple of them!CA $16.58