Foredom Typhoon Carbide wood carving burs and cutter

Foredom Typhoon Carbide Burs
Typhoons have unique structurally aligned points that leave a smoother finish than other types of tungsten carbide burs. Ideal for general shaping and sanding work on hard and soft wood, acrylic, die stone, plaster, hard rubber and fiberglass. Typhoon burs last longer and do not load as quickly. Max. speed 35,000 rpm. Made in USA.	1/8" Shafts in Fine And Coarse Grits Fine Grit burs are for general shaping and sanding. Coarse grits are for rapid removal and aggressive shaping. Clean Typhoon burs with a Brass Brush.

1/8" Shafts ~ Fine OR Coarse

Rotor Saw 11/16" Diameter

"Typhoon" carbide bur in rotor saw shape. Fine OR Coarse grit, 11/16" head dia. x 3/16" head length, 1/8" shank.

Typhoon Fine Rotor Saw 1/8" Shaft	$15.00
Typhoon Coarse Rotor Saw 1/8" Shaft	$15.00

Sphere 5/16" Diameter

"Typhoon" carbide bur in sphere shape. Fine OR Coarse grit, 5/16" head, 1/8" shank.

Typhoon Fine Sphere (5/16") 1/8" Shaft	$15.00
Typhoon Coarse Sphere (5/16") 1/8" Shaft	$15.00

Sphere 7/16" Diameter

"Typhoon" carbide bur in sphere shape. Fine OR Coarse grit, 7/16" head, 1/8" shank.

Typhoon Fine Sphere (7/16") 1/8" Shaft	$15.00
Typhoon Coarse Sphere (7/16") 1/8" Shaft	$15.00

1/8" Shafts ~ Fine OR Coarse

Long Taper 3/16" Diameter

"Typhoon" carbide bur in long taper shape. Fine OR Coarse grit, 3/16" head dia. x 3/4" head length, 1/8" shank.

Typhoon Fine Long Taper 1/8" Shaft	$15.00
Typhoon Coarse Long Taper 1/8" Shaft	$15.00

Taper 5/16" Diameter

"Typhoon" carbide bur in taper shape. Fine OR Coarse grit, 5/16" head dia. x 1/2" head length, 1/8" shank.

Typhoon Fine Taper 1/8" Shaft	$15.00
Typhoon Coarse Taper 1/8" Shaft	$15.00

Dove Tail 7/16" Diameter

"Typhoon" carbide bur in dove tail shape. Fine OR Coarse grit, 7/16" head dia. x 1/2" head length, 1/8" shank.

Typhoon Fine Dove Tail 1/8" Shaft	$15.00
Typhoon Coarse Dove Tail 1/8" Shaft	$15.00

1/8" Shafts ~ Fine OR Coarse

Bud 5/16" Diameter

NEW!! "Typhoon" carbide bur in bud shape. Fine OR Coarse grit, 5/16" head dia. x 34" head length, 1/8" shank.

Typhoon Fine Bud 1/8" Shaft	$15.00
Typhoon Coarse Bud 1/8" Shaft	$15.00

Flame 7/16" Diameter

"Typhoon" carbide bur in flame shape. Fine OR Coarse grit, 7/16" head dia. x 5/8" head length, 1/8" shank.

Typhoon Fine Flame 1/8" Shaft	$15.00
Typhoon Coarse Flame 1/8" Shaft	$15.00

1/8" Shafts ~ Fine OR Coarse

Cylinder SMOOTH END 5/16" Diameter

NEW!! "Typhoon" carbide bur in cylinder shape with smooth end for making stop cuts. Fine OR Coarse grit, 5/16" head dia. x 1/2" head length, 1/8" shank.

Typhoon Fine Cylinder Smooth End 1/8" Shaft	$15.00
Typhoon Coarse Cylinder Smooth End 1/8" Shaft	$15.00

Cylinder 5/16" Diameter

"Typhoon" carbide bur in cylinder shape. Fine OR Coarse grit, 5/16" head dia. x 1/2" head length, 1/8" shank.

Typhoon Fine Cylinder 1/8" Shaft	$15.00
Typhoon Coarse Cylinder 1/8" Shaft	$15.00

Ball Nose 3/16" Diameter

"Typhoon" carbide bur in ball nose shape. Fine OR Coarse grit, 3/16" head dia. x 7/8" head length, 1/8" shank.

Typhoon Fine Long Ball Nose (3/16") 1/8" Shaft	$15.00
Typhoon Coarse Long Ball Nose (3/16") 1/8" Shaft	$15.00

Ball Nose 5/16" Diameter

Typhoon Fine Ball Nose (5/16") 1/8" Shaft	$15.00
Typhoon Coarse Ball Nose (5/16") 1/8" Shaft	$15.00

Great Bur Cleaner

Abrasive Cleaner for Your Burs and Other Abrasives

Removes material from around the points of Typhoon burs. Also restores clogged Diamond points and other abrasives. Use it like a giant eraser by holding the accessory against the block while running to remove embedded debris.
Measures 3" x 3" x 1 1/2"

Foredom Abrasive Cleaner

$6.75