Proxxon Micro Detail System

Miniature Rotary Tool

LET US EXPLAIN THE SYSTEM

The Proxxon System operates on 12volts.
There is a AC Adapter that plugs into your standard electrical outlet which changes the voltage to the 12volt handpiece.
You have a choice a two different Handpieces: One has a speed control built in, the other does not.
You have a choice of two different AC Adapters: One is heavy duty and has speed control, the other does not.
The choice of which Handpiece and which AC Adapter is yours. You do NOT require the speed control option in BOTH the Adapter and the Handpiece.

Here are the two Handpiece Options

Four collets for shanks covering 1/32", 3/32", 7/64" and 1/8" (1,0 - 2,4, 3,0 and 3,2 mm) are supplied.

Handpiece #50 WITHOUT Speed Control

The diameter of only 1 3/8" makes the tool very easy to handle. Its weight of 1/2 lb, its quietness and effortless, vibration-free drive via the special permanent magnet motor, the ground spindle and collar bearing all contribute to the ergonomic design. An efficient cooling system facilitates extended use under various load conditions.

12Volt Handpiece #50 without speed control

$44.41

Four collets for shanks
covering 1/32", 3/32", 7/64" and 1/8" (1,0 - 2,4, 3,0 and 3,2 mm) are supplied.

Handpiece #50E WITH Speed Control

The thyristor electronic speed control enables the selection of speeds from 5.000 to 20.000 rpm. Phase angle control and feedback effect circuitry yield high torques, even at low speeds.
Other features are the same as the #50 without speed control.

12Volt Handpiece #50E WITH speed control

$49.76

3-Jaw Keyless Chuck

You may also want to consider a Keyless Chuck to use with either Handpiece for fast bit changes. Accepts accessories with shanks from 1/64" - 1/8" (0,5 - 3,2 mm).

Three Jaw Keyless Chuck

$7.43

Here are the two AC Adapters

Handpiece and rotary accessories are NOT included

AC Adapter NG2

Very compact design. Noryl casing (heat resistant - a necessity for transformer enclosures). Capacity 2.0A at 16 Volt open circuit - and 12 Volt under load = 24VA (DC). Primary supply 110-120V. Polarized socket for MICROMOT plug. Red LED indicates readiness for use. Modern design with holes for storing bits. Foldable tool rest provides a secure place for keeping the tool ready for use.

Proxxon AC Adapter NG2/S

$24.40

Handpiece and rotary accessories
are NOT included

AC Adapter NG5 Heavy Duty

This AC Adapter with electronic speed control comes in a compact Noryl casing (the material is heat resistant, recommended for transformers) and has a capacity of 5.0A at 16V no load and 12 Volt under load = 60 VA (DC). Primary supply at 110-120V. The thyristor electronic control (with feedback) allows for optimum tool speed and high torque at low speeds.

The NG5 offers three polarized sockets for other Proxxon 12 volt tools, so that three different tools can be plugged in at a time. In addition the unit features one pair of sockets for standard banana plugs with 5/32" diameter (4 mm diameter). It provides a master switch for turning off the transformer without needing to unplug. The red LED indicates "ready". The unit comes in a very compact and practical design with storage holes for insert bits and cutters with shafts of 3/32" and 7/64" (2.35 and 3 mm). The foldable tool rest keeps the tool ready for use.

Micromot NG 5/E Adapter

$62.60