Blade height and tilt adjustments.
The machine may be used with all Proxxon blades providing Ø 2" to 3 11/32" (50 -
85 mm) with 13/32" (10 mm) bore. The depth of
cut is adjustable from 3/64" - 7/8"
and the blade
may be tilted through 45°.
Includes adapter for vacumn hose connection.
|
Quality Table Saw FKS/E
The ideal machine for straight, miter and compound cuts. Useable on
all wood types, non-ferrous metals, plastics as well as rubber, cork, etc.
Even the smallest items may be cut cleanly, eliminating subsequent
finishing. A table indicates the recommend speeds for various
materials.
Substantial construction with load bearing parts
made of die-cast aluminum. The
machined aluminum work table measures 11 39/64" x 9 29/64" (295 x 240 mm). A miter slot and fence are provided.
An extension wing is housed integrally and pulled out to create an even more effective
table width
up to 19 11/16" (500 mm).
The drive of the unit is accomplished via a special, quiet motor and Optibelt toothed belt. The blade arbor has ball bearings and is fitted with a TCT
blade, size 3 5/32"
x 1/16" x 13/32" (80 x 1,6 x 10 mm), 24 teeth (available as accessory NO 28 734)
as standard.
|
|
|
|
|
|
Super Cut Crosscut Blade
80 teeth, 3 11/32" (85 mm) diameter x 1/64" x 13/32" bore (0.5 x 10 mm). Used on
hard and soft woods or plastics.
|
|
|
|
|
Blade shown has 10 teeth and not the 24 tooth blade decribed ...
|
Tungsten Carbide Tipped Blade - 24 Teeth
24 teeth, 3 1/64" (80 mm) diameter x 1/16" x 13/32" bore (1.6 x 10 mm). Used on
aluminum, hard wood, laminates or plastics.
|
|
|
|
|
|
Diamond Coated Blade
3 11/32" (85 mm) diameter x 1/64" x 13/32" bore (0.5 x 10 mm). Used on circuit boards
or glassfiber reinforced plastics (GRP).
|
|
|
|
|
|
Dado Blade Head Set
The dado set
consists of a guard and tungsten blade of 2" (50 mm) diameter,
5/64" (2 mm) width. Used to cut slots (dados) in drawers, picture
frames, etc. Slot depth max. 5/16" (8 mm).
|
|
|
|
|
1 Adjustable Fence with
scale
2 Machined, die cast
aluminum table approximately 6 3/8" x 6 3/8"
3 Quiet, high performance 110-120V
motor for prolonged use.
4 Sturdy housing made
of ABS with sawdust door on the right.
5 The Super-Cut saw blade
(Ø 2 9/32"), 80 teeth, individually set and sharpened, is included.
6 Graduated mitre stop.
|
Light Duty Table Saw KS115
This is for the smallest pieces to be cut, whenever working with a standard table
saw is impossible and too dangerous. The 2 1/2" (58 mm) diameter Super Cut blade
cuts soft woods up to 5/16" (8 mm), plastics to approx. 7/64" (3 mm), non-ferrous
metals to approx. 1/16" (1.5 mm).
Even fiberglass-reinforced circuit boards can be cut with the solid carbide saw
blade. The 85 W motor is very quiet, operates off 110 - 120V and has a prolonged
life expectancy.
The side door in the sturdy housing allows easy sawdust removal. The overall size
of this machine is approx. 5 3/8" x 7 1/8" x 3 5/32" (240 x 180 x 80 mm), the weight
4 lb.
IMPORTANT: The power transmission via the toothed belt and
ball bearings allows the right and appropriate blade speed (approx. 5.000 rpm) with
almost doubling the torque. Above all, it ensures a sufficient cutting depth, too.
|
|
|
|
|
|
Optional Blades for Light Duty Table Saw KS115
|
|
|
Crosscut blade "Supercut"
2.3" (58mm) diameter, .4" (10mm bore. 80 alternatively set teeth. Ideal
for hard and soft wood as well as plastic. For fast, clean cuts. Teeth
are individually set and sharpened. Superior cutting power.
|
|
|
|
|
|
Solid Carbide Saw Blade
2." (50mm) diameter, .4" (10mm bore. .02" (0.5mm) thick fine toothed. Ideal
for cutting fiberglass sheets, non-ferrous metals, plastics and other 'difficult'
materials.
|
|
|
|
|
|
|
Diamond Blade
2." (50mm) diameter, .4" (10mm bore. .02" (0.5mm) layer of diamond
for cutting ceramics, as well as fiberglass sheets.
|
|
|
|
|
|
Spring Steel Blade
2." (50mm) diameter, .4" (10mm bore. fine teeth. Designed for precision cutting.
|
|
|
|
|
|
|
Carbide Tipped Blade
2." (50mm) diameter, .4" (10mm bore. .04" (1mm) thick. Ten teeth for cutting
hard and soft woods, PC cards and aluminum.
|
|
|
|
|
|
|